A Wright & Co | Power Flushing
88
page,page-id-88,page-template,page-template-full_width,page-template-full_width-php,ajax_fade,page_not_loaded,,qode-title-hidden,qode_grid_1300,footer_responsive_adv,qode-child-theme-ver-1.0.0,qode-theme-ver-9.5,wpb-js-composer js-comp-ver-4.11.2.1,vc_responsive

POWER FLUSHING

25percent
‘Power, Jet or Hard Flushing’ – there are several names for this useful, innovative service. Basically, it means cleaning your central heating system with fresh water at a high velocity but at a low pressure combined with the use of powerful cleansing and mobilising agents.

 

Power Flushing removes sludge, limescale and corrosion deposits from the heating system. This prevents excessive noise, increases efficiency by 25% or more, and protects against future damage – including possible boiler failure. It’s hassle-free, there’s no mess and at the end, your system is left with fresh clean water.

WHEN TO POWERFLUSH

Prior to fitting a new boiler

If there is sludge in the system

If the radiator water looks dirty

If your radiators are cold or partially cold

If your radiators need bleeding regularly

When noises are coming from the boiler or pipework

Many modern boilers, while more efficient and less damaging to the environment, are susceptible to problems caused by debris in the system. That’s why we strongly recommend Power Flushing as part of your overall heating maintenance program.

HOW DOES IT WORK?

The power flushing pump is simply connected into the heating system, either across standard circulator pump couplings, across the tails of one radiator, or wherever most practicable.

 

The powerful flow, combined with instantaneous flow reverse device, will dislodge and mobilise deposits and corrosion which resist traditional system cleaning methods.

 

Once the corrosion and sludge deposits have been loosened and mobilised, clean fresh water is forced through the heating system, pushing the contaminated water out through the pump’s drain to waste. During this process, radiators are individually flushed, without removing or disconnecting them from the system, by directing the full output of the pump through each radiator separately.

Need your boiler serviced, repaired or replaced?